External Stores Jettison Panel

← Back to Fairchild Republic A-10 Thunderbolt II

Function Description

The External Stores Jettison Panel provides a dedicated, emergency function to release all external stores from the aircraft pylons.

When pressed, the jettison button sends an electrical signal to disengage the bomb rack latches, instantly releasing external fuel tanks or ordnance.

This feature is used in critical situations, such as engine flameout recovery, drag reduction, or combat damage avoidance.

Control Description EXT STORES JETT Button

Function: Instantly releases all external stores (fuel tanks, bombs, or pods).

Action: Momentary push-button; must be pressed deliberately to activate.

Safety: In the real A-10C, this button is guarded or recessed to prevent accidental activation.

Type: Momentary push button (normally open).

Label: “EXT STORES JETT” (white text, black background with yellow hazard border).

Suggested Hardware Components

Push Button

1 × Momentary push button, red cap (12–16 mm diameter).

Optional: Guarded or recessed mounting for safety authenticity.

Backlighting

Yellow/amber LED strip beneath hazard border for realism.

Optional white LED behind text for illumination.

Panel Build Recommendation

Top Layer: 3 mm clear acrylic, front-painted black with engraved text and hazard stripes (engrave lightly for clean yellow paint infill).

Mid Layer: 5 mm support for button housing and LED mount.

Rear Layer: 2 mm mounting plate for electronics.

Overall Progress

28%

Recent Updates

Public test

Mar 9, 2026Open

design

Project Update — Rethinking Panel Design for Everyone

I paused development of the A-10C panels for a moment to focus more deeply on the electronics side of SIMSTRUCT. After all… what is a body without a soul? The front console is essentially complete — all panels are designed, printed, tested, and the fit is extremely accurate. I’m very happy with how the results are shaping up. However, with the arrival of a new batch of toggle switches, it became clear that I’ll need to revisit some parts of the design, especially the mounting geometry on the back panels. This raised an important question about the future direction of SIMSTRUCT: How can I make the A-10C cockpit files and electronics accessible to everyone, regardless of skill level or component availability? Different builders use different hardware, and even small variations in switch dimensions can become barriers to an otherwise simple build. That goes against my vision — which is to make cockpit construction achievable and enjoyable for all. Because of this, I’m now exploring a “one-size-fits-all” approach for panel design. The idea is to create mounting systems and tolerances flexible enough to support a wide range of switches and components without forcing anyone to hunt for specific hardware. And I would love to hear from the community: What challenges have you faced with panel compatibility? What ideas or suggestions do you have for universal mounting systems? Are there components you think should be prioritized for broad compatibility? Thank you all for following the project and supporting each step of this journey. Much more is coming soon — and your feedback will shape it. See you in the next update.

Nov 20, 2025Open

electronics6 images

SIMSTRUCT – Front Console Input Board Update!

(A small pause… but for a very good reason!) Hey everyone! I took a short break from modeling the A-10C panels because I needed to lock down something even more important: the electronics heart that will power the entire front dashboard. Sometimes you have to pause the build to keep the ideas fresh — and trust me, this part was worth the pause. Today I’m sharing a sneak peek of the Front Console Input Board, the “brain” that will handle all the switches, toggles, encoders and sensors from the A-10C front panel. No more cable chaos. No more guessing pins. No more fragile protoboards. Just plug, fly, and smile. 😄 What’s working right now Fully integrated ATmega32U4 (native USB) High-density input matrix with 20 shift registers (160+ digital inputs!) Four 50-pin IDC ports for clean, organized panel wiring Built-in filtering, decoupling, and DCS-ready structure Designed from scratch specifically for the A-10C front console And best of all: It will ship with firmware pre-flashed, DCS-BIOS profiles, naming conventions, and calibration already aligned with the A-10C cockpit logic. You plug it in, connect your switches, and your sim suddenly feels alive. Next milestone I’m now beginning development of the output slave board — the board that will handle backlighting, annunciators, caution lights, and other outputs. Once both boards are complete, the entire front console becomes one clean, integrated ecosystem. What’s coming If all goes well, the full A-10C front console set (inputs + outputs + panel files + wiring guides) should be ready for testing in about one month. ✈️ And beyond… A-10C was my first love, so she had to come first But after she’s complete, I’ll be releasing plane-specific electronics for multiple aircraft. Why plane-specific? Because every aircraft deserves its own optimized, precise electronics. No improvisation. No wrestling cables. No guessing pins. Just: ✔️ Plug in your console ✔️ Load your profile ✔️ And fly. Community Support Coming Soon Over the next 2 weeks, I’ll be launching: A Patreon with supporter tiers (behind-the-scenes progress, early access files, exclusive perks) The official SIMSTRUCT website, where you can follow development and access resources, files, instructions, tutorials and more. And in about 3 weeks, I’ll open the Interest List + Pre-Order Pipeline for those who want to secure their spot for the first production run. Your feedback and support mean the world to me — and they help push this project forward faster. I will keep posting Hope you enjoy the preview! Let me know what you think!

Nov 19, 2025Open